Why do such a thing? Well, if you’ve created your own aliases for commands and you try to give someone your ps1 script file, it will not run because they have not got the same aliases defined as you. Also, scripts that use fully-resolved names like “Get-ChildItem” are more readable for a newcomer to PowerShell than one that is using the unix-like “ls" alias for example. "Get-ChildItem" leads quite directly to the MSDN documentation, but "ls" might lead you anywhere. Before you publish a script online somewhere for the world to use, it’s important that you try to remove any aliases and replace them with the native command names.

Doing this kind of thing has been talked about before but it was always a very difficult thing to do with PowerShell v1.0, what with the lack of BNF documentation describing the grammar etc. Thankfully, it's a lot easier to do with PowerShell v2.0 (currently at release CTP2) because the team has exposed the Tokenizer for use in scripts. There's been suprisingly little use of it so far, so I figured I'd start the ball rolling with a series of articles based around it. So, let's look at an example script that uses aliases and put it through the meat grinder:

As you can see, it spits out the expanded script to the output stream. The informational messages are written to the host, so they won't interfere if you redirect the output to a file like: .\resolve-aliases.ps1 in.ps1 > out.ps1

Here's the Resolve-Aliases.ps1 script itself:

Of course, this requires PowerShell v2.0 CTP2. Next in the series, I'll give you a script to check your ps1 scripts for backwards compatibility against PowerShell 1.0. That should be handy for those naughty admins out there who despite all the warnings have installed v2 in production.

Someone on a private mailing list I'm on lamented the problem with powershell's '>' redirection operator defaulting inflexibly to use unicode for encoding the output file. This is not very compatible for NT's ancient console subsystem which works best with ASCII data. Fortunately, there's an easy workaround to fix this:

Due to the magic of command discovery and the fact that > really does use out-file, you can "fix" this by placing the following in your $profile:

function out-file($FilePath, $Encoding, [switch]$Append) {
$input | microsoft.powershell.utility\out-file $filepath -encoding ascii `
     -append:$append
}

From now on, > will be forced to use ASCII encoding. This works because functions have higher precedence than built-in commands in powershell's command discovery search.

UPDATE: Rather annoyingly, I'm informed that this particular workaround doesn't work on v1.0 of PowerShell. I tested the above on v2.0CTP2 only. Doh.

Just a quick one for the frustrated searchers out there. If you've recently installed the SP1 beta for Visual Studio 2008 (or just the 3.5 sp1 beta alone), and you find that you have serious difficulty using SharePoint Designer 2007 against a remote instance of SharePoint running in a VM (or a physical machine) that doesn't have the SP1 Beta bits, you know what to do. My SPD would refuse to load the master page from my virtualized SharePoint instance until I had installed .NET 3.5 SP1 Beta onto the virtual machine also. Just so you know!

In the spirit of "tidying things up," and pushing out nearly-there projects, I turned my attention to http://www.codeplex.com/PSMobile. I have a number of seriously annoying (to myself and people around me) habits, one of which is having a hard time finding the motivation to get that last 1% bit of work done. I am trying to kill bludgeon that habit, and this is fruit number #2 of that attempt at self-correction. I have some other important out of band work that I need to complete, but I find I cannot concentrate on that until these personal projects that have been niggling me for ages are dealt with. Anyway, lets dispel a couple of questions with a screenshot:

Requirements

• ActiveSync 4.2 or higher (or Windows Mobile Device Centre 6.0+ on Vista) Download
• A Windows Mobile device (PocketPC/SmartPhone 2002, 2003, 2003SE, Windows Mobile 5, 6 or 6.1)
• Windows PowerShell 1.0 or 2.0 (CTP) Download

Features

• Copy, Move, Delete items between folders on your device (including Storage Card) with standard PowerShell Cmdlets
• Move/Copy files to/from your device and your desktop with ConvertTo-WMFile and ConvertFrom-WMFile
• Get device information and manipulate and explore the registry with a rich device object returned from Get-WMDevice
• Invoke-Item against remote items to or execute or trigger their associated applications
• Invoke-Item with -Local switch to attempt to execute a remote file in the context of your local desktop (e.g. office docs or images/videos)
• New "Mode" attributes specific to Windows Mobile file attributes: (I)nRom, Rom(M)odule
• File/Folder objects' attributes can be modified with .Attributes properties just like FileInfos etc.
• Tab completion with MoW's PowerTab Download

File Manipulation

A picture's worth a thousand words.

Cmdlets and Definitions

Here's a table of the syntax for the included Cmdlets.

* These Cmdlets that accept a path will bind to pipeline input via PSPath property name.

If you've got any problems, suggestions or ideas, please post into the discussions board on the web site. Have fun!

UPDATE May 26th: You must run PowerShell v2.0 CTP in STA mode for this to work. Start the shell, then run "powershell -sta" from the command line to start a new version of the shell in "single thread apartment" mode (STA). This is required for WPF to work correctly.

That is a bit of a mouthful of a title for this post but it's the best I could come up with. This post takes some of James' scripty bits and Jaykul's scripty bits and shows you how to create a countdown timer written in PowerShell script that runs in the background without blocking input. Just like Jaykul's original clock, you can drag it around and right-clicking it will close it. His version was the current time and it also showed some system resources. I changed it into a countdown and removed the other nested graphs. When it hits 00:00:00 it turns red. Here's what it looks like:

Here's the source of invoke-background.ps1:

Next, here's the modified clock script:

...and finally the modified clock.xaml file:

Important: you'll need to save all files into the same directory and fix up the path to the clock.xaml file in the start-countdown.ps1 script.

Have fun!

This question has been asked in various ways over the last few years and I don't believe an answer that suits everyone has been proffered yet. I think this is part of a broader problem space that needs to be solved, one that I (and many others) have spent a bit thinking about -- for me personally, it's been mostly in the pub strangely enough, usually with a pint in hand -- and while I don't profess to have the answer, I do spent most of my powershell time tinkering with providers and have some views on this

Firstly, if you haven't seen this suggestion I've raised on connect (Allow providers other than the filesystem provider to surface commands) then take a gander at it now. It suggests allowing providers other than the FileSystemProvider to surface commands by using a new ProviderCapabilities flag. For those not able to read this suggestion, the bottom line is that currently one can execute a command on the filesystem by using the following syntax:

ps c:\> .\test.bat
hello, world

However, if you had another provider that linked into a mobile device, the amazon s3 service or MSL skydrive (when are they going to release an API?) for example, you would allow execution of commands with the same syntax, e.g.

ps skydrive:\> cd ppts
ps skydrive:\ppts> .\mydemo.ppt
The term '.\mydemo.ppt' is not recognized as a cmdlet, function, operable program, or script file. Verify the term and try again.
At line:1 char:8
+ .\mydemo.ppt <<<<

As you can see, this doesn't work.

What's important is having the same experience with similarly capable providers; e.g. those that can host executable content. Yes, you can implement support for invoke-item, but it's a bit discordant. One of the nicest features of powershell (and sometimes the most confusing) is that all providers - variable, function, environment, filesystem etc all hook into the same framework. There are some philosophically irksome differences like the fact that the  variable drive is the "default" provider, since dollar-qualified expressions are assumed to point there if not qualified with a drive name:

ps c:\> $host
Name             : ConsoleHost
Version          : 1.0.0.0
InstanceId       : 9d8a29bf-3d84-4ce6-8651-e0c72afb404b
UI               : System.Management.Automation.Internal.Host.InternalHostUserInterface
CurrentCulture   : en-CA
CurrentUICulture : en-US
PrivateData      : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy

so let's give a drive name this time:

ps c:\> ${c:test.bat}
@echo hello, world

This is a lot easier to understand once you realise that the '$' prefix is a grammatical shortcut into the IContentReader/IContentWriter interfaces on every provider; Much easier than just blindly committing to memory the method to read a variable and the method to read a file (imho). Once you introduce this capability into other providers, you then have to address ye olde $env:path variable. Currently this variable is imported from the system environment. The system, aka Windows, knows nothing about powershell and its drives. When using Get-Command, the search order for discovering commands is:

Aliases, Functions, Cmdlets, Scripts, Commands located in the directories specified by the Path environment variable, External scripts.

As we can see, Commands (5) are discovered via the $env:path variable. The other items (apart from 3 - cmdlets) all live in a flat namespace, so there's no path involved there.  I'd love if somehow it were possible to add any powershell path to this variable, even if they were limited to drive-qualified paths:

ps c:\> $env:path
c:\windows; c:\windows\system32; ...; s3:\utilities; "mobile:\storage card"; ...

Perhaps this information could be persisted inside PowerShell only so when the shell is exited, the path environment variable remains unchanged when viewed from the external windows system. This might mean that PowerShell paths would have to be appended in your profile at each load, but this isn't a bad thing either, IMO. So finally, on to the crux of the matter: disambiguation of identically named Cmdlets. Ultimately I don't believe there is a magic answer. This is solved in Windows by using the path variable, and so I believe it isn't such a bad idea to solve it with a path variable in powershell too. Behold $env:cmdletpath

ps c:\> $env:cmdletpath
Microsoft.PowerShell.Core; Microsoft.PowerShell.Host; Microsoft.PowerShell.Management; Microsoft.PowerShell.Security; Microsoft.PowerShell.Utility; VMWare.Commands.Utility

It's simple. It's optional. Snap-in qualified commands would continue to work, overriding the cmdlet search path. Instead of having to alias multiple commands when using a snapin that replaces a suite of built-in cmdlets, you can just re-jig the search path. Done. It's not the answer to everything, but it sure would make life a bit easier, no?

I have two machines at home here, one is a Vista SP1 laptop, the other an XP SP3 Desktop. The latter was recently patched with SP3 in a desperate attempt to prolong its dwindling desire to function in a reasonable fashion. It's what I call from a development box point of view, "Encrusted." Encrustation is the point at which you no longer have any idea what beta, CTP, evaluation or otherwise not recommended software is installed. It defies its digital nature by throwing up different errors each time its booted. Anyway, the SP1 Beta would not install on this machine, specifically the .NET 3.5 beta bits. I may investigate further, but frankly I think it's time for fenestrecide and a corresponding rebirth.

This led me to try updating my Vista laptop instead. If you download the VS2008 patch you'll notice it's only about 450KB. It's a stub which detects what's missing from your environment and downloads only what it needs. I found the installer to be extremely useless in terms of giving feedback over what it was doing. It just says "installing" and you have to watch a progress bar slowly creeping across with many stalls where your machine doesn't seem to be doing anything at all. This time I downloaded the separate .NET 3.5  SP1 beta bits which size about 220MB. I installed this first and it seemed to go OK. Next, I downloaded the VS patch and let it go ahead. Again many stalls where you're wondering if it's actually going to work at all. Eventually, it failed. After some examination of the logs, I discovered that it didn't like the post-RTM patches for supporting the Reference Source server ( Shawn Burke's Blog - Configuring Visual Studio to Debug .NET ). After removing these updates, I was able to progress to past this prior point of failure but by this time it was midnight, having started the process in earnest at around 8pm. I decided to leave it to run overnight.

In the morning I had a stalled install process and a dialog notifying me that files were in use and that I should shutdown "Machine Debug Manager," "Windows Sidebar Component" and "Windows Sidebar" - Vista GUI cruft - if I wanted to avoid a reboot. I stopped the MDM service and shutdown Windows Sidebar and chose "Retry" from the options of "Retry," "Cancel" and "Ignore." Even though I hit "Retry," the bland dialog displaying "installing" now switched to "Installation failed.. rolling back" - but thankfully, it was NOT rolling back. The status bar appeared stalled for about 10 minutes then popped up the same dialog, this time with only "Windows Sidebar" listed. This time I chose "Ignore" implicitly accepting the penalty of a reboot to allow the status bar to continue its inexorable journey to the right, all the time the text telling me that the installation had failed and it was rolling back. Ten more minutes and the install succeeded. To summarise, VS seems snappier, and everything seems to work fine. I'll post more if I discover anything of interest.

The usual suspects have more information:

Beta of .NET 3.5 and VS2008 SP1 is out (Scott Guthrie)

VS2008 and .Net 3.5 SP1 Beta - Should You Fear This Release- (Scott Hanselman)

.NET 3.5 SP1 Beta- Changes Overview (Patrick Smacchia)

Now this is barely worth blogging, but one of the things I used a lot when I was confined to cmd.exe (yes, "confined" is the word I would use, 4NT aside) is the wonderfully simple copy con filename.txt then type a few lines and end it all with CTRL+Z and enter. So, if you're a PowerShell noob and yearn for this olden-days simplicity like dead parrots pine for the fjords, then this is for you:

I saved this to copy-console.ps1 and aliased it to "cc." Of course, you can do whatever you want - it's probably easier to just put it into a function in your profile. Just place the script above into your profile and remember: CTRL+Z then enter to save.

UPDATE 2008-04-04: Somehow I completely broke this in my attempts to "clean it up" before posting. I've reposted a better version (imho), and implemented encoding support as suggested out in Jason's comment below

PowerShell has several "type accelerators" which are used exactly like a casting operation. Examples of these special operators are [xml] and [wmi]. The former is used for quickly converting a string of xml into a fully-fledged System.Xml.XmlDocument object.

Often I find myself converting things to and from hexadecimal using the -f operator, but this always seemed like just a little too much typing for me. Enter the [hex] accelerator type:

As you can see from the source below, there's no magic here. This is just a straight cast, but I have no namespace. If I had a namespace, say, like "Nivot.PowerShell", we'd have to cast using [nivot.powershell.hex] instead of just [hex]. All of the trickery is done using operator overloads in C#. These tells .NET (and in turn, powershell) how to behave should someone try to add, subtract, remove or divide our instances.

The next step is to tell PowerShell's formatter what to do with the new type. Here's a simple format definition that tells the formatter to call ToString() on the Hex instance. This is the method that does the conversion by calling ToString("X") on the integer field. "X" means format the integer as hexadecimal using upper case. A lower-case "x" would output the value using lower-case (if you couldn't guess ).

If we don't load this format file, PowerShell just emits a couple of blank lines when you try to use it.  You'll notice from the screenshot above that the blank lines still appear. I'm not sure how to remove these - it looks pretty ugly compared to the output of the [int] object. If you want to play with this, you can download the zip file below and unzip the contents into a single folder and run "hex.ps1". I didn't bother with a full Snap-In, it just loads the DLL using reflection. It also loads the format ps1xml too. Have fun.

Just a minor thing, but this is a filter I've been using for a while now as a replacement for Get-Member. It's always annoyed me that the Get_ and Set_ methods are returned along with the actual properties. The only place that's actual useful is when you're using an object wrapped in the [xml] adapter since those objects do not expose the XmlDocument's properties in the adapted member set.

update: if you use (of course you do!) MoW's PowerTab, you can disable display of the accessor methods with $PowerTabConfig.ShowAccessorMethods = $false.

Discovered while playing around with the new SPUserToken class and associated goodness that is the new impersonation APIs in WSS 3.0 / SPS 2007. from Reflector:

public static void SetApplicationCendentialKey(SecureString password)
{
    SPCredentialManager.CreateApplicationCendentialKey(password);
}

Ouch! how did that get past QA? there are only five methods on the class - looks like it was a late night for whomever wrote these bits. Unless I'm very much mistaken, shouldn't that read Credential?

microsoft.sharepoint.spsecurity.setapplicationcendentialkey

My last post got me thinking about the problems experienced when trying to write culture aware software. Yeah, I know it was actually me that was unaware of the culture, but this time it's about the software end of the deal; in particular, the recently updated Microsoft Business Data Catalog Definition Editor for Microsoft's popular SharePoint 2007 server. If you read some of the comments on the blog, you'll see that various people (using a non US English version of Windows) have installed it and have come across a problem where the tool cannot find the local security group called "Builtin\Users." Oops. In the world of cutting-edge technology, people often install software that doesn't match the installed language of their O/S. The fact of the world is that all major symbolic computer languages are based around English, and the most popular software gets written in English first. Here in Quebec, Canada, French is the primary language with English coming second (Canada is officially bilingual - although most of the country only speaks English). Localization of software takes a fair amount of time. It's not just translating a resources file - there are hot-keys to reassign (the Bold shotcut in French MSWord is CTRL+G for example, bold being Gras in French) dialog boxes to resize, labels and controls to reposition etc. Some languages are more verbose than others and end up with text that won't fit. However, there are things you do to avoid certain problems -- lets take the issue above as an example.

Logins and Group names are just an abstraction in the Windows security subsystem. These things are actually represented by value called a SID ( system.security.principal.securityidentifier ). No matter what version of Windows you use, the SIDs for built-in accounts and groups are the same:

First using an en-US system:

and a French (fr-FR) system:

As you can see, the SID is the same: S-1-5-32-545. An example of this is shown below - a simple If-Elevated function that takes two Scriptblocks: the first is executed if the user is running as an administrator, the second is running if the user is just a plain well, user:

I'm happy to say that the powers that be in Microsoft have deemed me MVP worthy - I am now an official Microsoft Most Valued Professional in Windows Server Admin Frameworks for 2008, more specifically for my open source work and public support of Microsoft's most excellent object-oriented interactive shell, PowerShell during the last 18 months.

I've just returned from an extended computational absence, so hopefully I can get back to churning out code and the odd blog post.

In case anyone is interested, here are my slides in PowerPoint PPTX format from the most recent PS Virtual User Group. It covers the new Path handling infrastructure for PscxCmdlets in the upcoming PowerShell Community Extensions 1.2 and some brief information on my PowerShell Eventing snap-in for PowerShell.

psvug2_oisin_grehan.zip (152 KB)

(updated to a zip: it appears DasBlog will not serve pptx files?)

As knowledge of PowerShell increases for those new to .NET, there comes a point when people start to notice some shortcomings of the Assembly loading/unloading mechanisms of the 2.0 CLR. Namely, once you